Leather dye repair kit for colour restoration Colourlock Mild cleaner Black dye

Leather dye repair kit for colour restoration

With mild cleanser / Black dye 

For plain and structured leather

Allows to repair scratches, abrasions or slight fading on leather

Kit contains :

• Mild cleaner to clean leather carefully and prevent dyeing and care from staining dirt on the leather

• Leather Fresh dye to refresh the color of striped, branded or slightly faded leathers

• Antioxidant and anti-UV protective lotion to slow down the degradation of leather

• Cleaning sponge, sponge for Leather Fresh application, cleaning cloth, gloves

The protective lotion restores suppleness to the leather and protects old leathers from aging

Sufficient quantities to process a complete car interior

Read the instructions carefully before application

Colourlock - Made in Germany

Perfect for the leather interiors of convertibles and vintage Porsches

Usage tips

Always test any products first on a hidden area in case they affect the colour.

Clean the leather thoroughly before coloring or applying any care. Use the mild cleaner for normal soiling or the powerful cleaner for heavy soiling and stains. This prevents staining and care from fixing dirt on the leather. The leather cleaning brush makes work easier in the event of heavy soiling.

The leather cleaner is delivered in a practical foam bottle. Foams clean more effectively than liquid cleaners, their consumption is considerably lower and the leather is not too wet (to prevent it from hardening as it dries).

Apply the cleaning foam to a sponge - never apply directly to the leather - clean the leather from one seam to the next and possibly repeat the operation several times. Then wipe off the residue from the product with a soft, damp cloth and allow it to dry.

After cleaning the leather with a powerful cleaner or for oily or just nourished leathers, please degrease the leather with leather cleaning essence before applying the Leather Fresh stain.

You can color after the cleaned leather is dry (wait about 30 minutes at room temperature or dry with a hair dryer). Apply the coloring with a sponge evenly on the surfaces to be refreshed, from seam to seam and dry with a hair dryer.

For small areas, it is sufficient to apply the product locally. Treat only discolored surfaces. If one application is not enough to cover, apply several times with a hair dryer between coats.

For surface care, use the protective lotion. Thanks to its antioxidants, the lotion slows down the degradation of leather and its anti-UV filter system protects old leathers from aging. In addition, the lotion restores suppleness to the leather.

The protective lotion must be applied when the leather is completely dry, 24 hours after cleaning the leather or coloring. Put a little protective lotion on a soft cloth, apply the product to the leather and allow to dry without polishing. A single application is sufficient. Repeat the operation 4 times a year on highly stressed surfaces (intensive use, exposure to the sun or near the heating).

The coloring is only applied to worn surfaces.

The cleaner and maintenance are to be used on the entire surface.

If the leather is extremely worn or dirty or the area to be cared for is very large, more products may be needed. However, this is not the general rule.

By watching the following video tutorials, you can see how to use the different products in the kit.

Most damages can be repaired with this kit